Introduction and installation of stainless steel wall decorative panels

Introduction and application of stainless steel

Among the common primary color stainless steels, austenitic stainless steel is the most suitable coloring material, and a satisfactory color appearance can be obtained. Ferritic stainless steel is less colored than the former because it may increase corrosion from coloring solutions. Low carbon and low carbon stainless martensitic steels only produce dark or black surfaces due to their low corrosion resistance. Austenitic stainless steels were reported to have surface oxidation at low temperatures, exposure to industrial environments for 6 years, exposure to the marine atmosphere for a year and a half, and immersion in boiling water. After 28 days, or heating to about 300°C, there was no change in the brightness of the color. In addition, it can withstand general forming, stretching and bending, and work hardening. In addition to the decoration of exterior walls and colored architectural sashes, colored stainless steel can be used in many other fields. For example, solar collector panels can be made of black stainless steel plates, and the heat absorption rate can be as high as 91% to 93%.

In the world of arts and crafts, the combination of stainless steel color and printing can be done by engraving, grinding and point matching to produce three-dimensional relief murals and hanging screens that never fade. In addition, consumers also want to use colored stainless steel for home appliances, kitchen utensils, kitchen utensils and bathroom utensils. Stainless steel decorative plate is a very good decorative material with the best decorative quality, so it can be widely used.

Second, the installation process of stainless steel wall decorative panels

 • The first step of the installation process of the stainless steel wall decorative panel:

When we install stainless steel wall panels, the first thing to do is to cover the wall to be decorated as the base layer. Generally speaking, the choice is mainly plywood or wood.

The second step of the installation process of the stainless steel wall decorative panel:

Secure the decorative surface with air nails. The footings are then nailed to the decorative wall, usually using the corners of an aluminum alloy to secure the corners, which are then secured with strips.

 • The third step of the installation process of the stainless steel wall decorative panel:

Secure the pegs in place. Finally, according to the size of the trim panel made of stainless steel, it is embedded in the inner corners and tool bars of aluminum alloy.

The above is a brief description of the installation process of stainless steel wall decorative panels provided by Foshan Feirote Steel Industry. We can see that the installation of stainless steel wall panels is very simple.